食色app吧

Location: Home > Products > Mixing equipment > SLHY series single shaft double ring belt mixer

SLHY series single shaft double ring belt mixer

Hot product recommendations

Excellent solution

Poultry Feed Solutions

Premix

Livestock Feed Program

Purchase Hotline: 0371-89910659

产品优势 型号参数 提交需求 Product introduction Product advantages Model parameters Submit requirements

Product introduction

Scope of application : Longchang SLHY series single-shaft double-ring belt mixers are widely used in small and medium-sized feed factories to mix powdery materials, make the components of the mixture evenly distributed, and ensure the quality of compound feed.

Working principle : Longchang single-shaft endless belt mixer is a horizontal cylinder. The internal rotor is composed of ribbon-shaped spiral blades, shafts and rings, and supporting rods. The blades are divided into two inner and outer turns, which are left-handed and right-handed. When the rotor rotates, the left-handed blade pushes the material from one end to the other, and the right-handed blade moves the material in the opposite direction. Through this continuous turning and convection, the material is uniformly mixed. Both ends of the rotor are close to the inner wall of the machine body, and scraper plates are welded on the outer blade stays, so that the materials in the four corners of the machine can be fully stirred.


Product advantages

1. The material is evenly mixed. ◇ The cross section of the cylinder is completely circular. There is no dead angle in the mixing. The mixing time is 2-4 minutes.
◇ Bottom full-length widened door opens to reduce residue;
◇ Mixing uniformity: coefficient of variation ≤ 7.
2. Safety ◇ The door opening angle is greater than 90 degrees, the door opening mechanism is self-locking, and the pressure-loss discharge door of the cylinder does not open;


Model parameters


Deliver requirements online

You can fill in the form below to submit your request, and we will contact you to resolve within 24 hours. (Note: Your information is for internal company use only, and we will keep it strictly confidential for you.)