食色app吧

Location: Home > Products > Conveying Equipment > TFPX Series Rotary Distributor

TFPX series rotary distributor

Hot product recommendations

Excellent solution

Poultry Feed Solutions

Premix

Livestock Feed Program

Purchase Hotline: 0371-89910659

产品优势 型号参数 提交需求 Product introduction Product advantages Model parameters Submit requirements

Product introduction

Scope of application : Longchang TFPX series rotary distributor is a kind of conveying equipment, which is usually used in conjunction with a hoist to distribute the lifted materials to different places as needed, such as to various storage bins. This equipment is widely used in grain and feed processing plants, oil plants and starch plants to distribute powdery and granular materials.

Working principle : The reduction gear motor drives the main shaft, and the main shaft drives the guide material receiving elbow to run along the guide rail. In the control circuit, turn the switch as needed to restart the motor. After the guide receiving elbow runs to the specified position, under the action of the travel switch, the power is immediately cut off. The guide receiving elbow stops in the designated discharge positioning groove. The seal outer ring and the seal pressure ring are pressed by the positioning groove. It is tightly sealed on the inner wall of the lower case to form a sealed state, and then the blanking is started. An ash outlet is provided on the lower casing to discharge dust in the machine.


Product advantages

1. Longchang TFPX series distributors are easy to operate, convenient to install and maintain; the equipment has an access door to facilitate daily maintenance and repair;

2. The transmission adopts a reducer direct-coupled transmission, which has a compact structure and the guide material receiving elbow rotates smoothly;

3. With the help of the travel switch and the positioning groove, the positioning of the guide material receiving elbow is accurate, and material channeling is avoided. After the guide material receiving elbow is positioned in the designated positioning groove, the rubber outer ring and the rubber pressure ring are firmly pressed on the lower shell Good sealing performance on the inner wall.


Model parameters


Deliver requirements online

You can fill in the form below to submit your request, and we will contact you to resolve within 24 hours. (Note: Your information is for internal company use only, and we will keep it strictly confidential for you.)